Part #: 1000-050

Call (858) 277-3300 to order

» Download Data Sheet (PDF )

  • Elevation Pattern: 225 - 450 MHz Monopole (Elevation)
  • Azimuth Pattern: 225 - 450 MHz with 30 - 90 MHz Co-Site Isolation (Azimuth)
  • Engineering Drawing: All dimensions are in inches
  • Images: 225 - 450 MHz with 30 - 90 MHz Co-Site Isolation (Azimuth)

Product Overview

Southwest Antennas Part# 1000-050 is a rugged monopole antenna with an operational frequency range of 225 - 450 MHz. Internal matching components within the antenna allow it to deliver a wide operational bandwidth while matching the antenna to 50 Ohm systems. An integrated highpass filter provides >44 dB of isolation in the 30 - 90 MHz band.

Features: 
  • 225 - 450 MHz
  • Monopole Design with built-in 50 Ohm matching network
  • 0 dBi Gain
  • Integrated highpass filter
    • >44 dB of isolation in the 30 - 90 MHz band
  • Lightweight design
  • Bandwidth achieved by using internal matching components (within antenna)
  • Extremely rugged design
  • Low visibility / reflectivity
  • Highly flexible
  • Waterproof & fully potted design
  • Black chrome non-rotating TNC(m) RF connector
  • 20 Meter waterproof design (when fully mated)

Note 1: The specifications and performance of this antenna are dependent on antenna matching network and counterpoise dimensions, and may be affected by other antennas on the radio.

Note 2: 50 Ohm impedance is measured at the antenna connector when mounted to radio counterpoise.

Antenna Specifications

Parameter Value Units Tolerance
Antenna Pattern Omni Antenna
Frequency Band S Band
Impedance 50 Ohms
Minimum Frequency 0.225 / 225 GHz / MHz
Maximum Frequency 0.45 / 450 GHz / MHz
Frequency Bandwidth 0.225 / 225 GHz / MHz
Maximum VSWR 4.5:1 Ratio
Maximum Gain 0 dBi When mounted to a counterpoise of 1.5" x 2.6" x 7.75"
Polarization Vertical
Isolation >44 dB From 30 - 90 MHz
Maximum RF Input Power 2 Watts
Horizontal (AZ) Beamwidth 360 Degrees
Vertical (EL) Beamwidth 78 Degrees
Ground Plane Required Yes
Antenna Labeling SWA logo label and product info on radome
Radome Material Black Polyolefin with Black End Cap
Color Black
RF Connector Type TNC(m) Non-Rotating
RF Connector Features Black Chrome
Product Height 10.62 / 269.75 inches / mm ±0.13"
Product Diameter 0.57 / 14.48 inches / mm ±.02 measured at RF connector (.58" ±.02 at widest point of base)
Product Weight 1.9 / 55.0 oz / grams

Downloads

Data Sheet (PDF )