Part #: 1032-047
$1,480.00
Qty 1-9 10-24 25-99 100-249
Price (each) $1480.00 $1451.00 $1205.00 $1151.00
Qty 250-499 500-999 1000+  
Price (each) $1099.00 $1044.00 $989.00  

» Download Data Sheet (PDF )

Omni Quadrifilar Antenna, RHCP, 1.05 - 1.35 GHz, 3.1 dBic, Integrated Bandpass Filter
  • Elevation Pattern: Referenced to +5 dBic
  • Azimuth Pattern: Referenced to +5 dBic
  • Engineering Drawing: All dimensions are in inches

Product Overview

Southwest Antennas Part # 1032-047 is an Omni-directional quadrifilar antenna with an operational frequency range of 1.05 - 1.35 GHz, and a maximum gain of 3.1 dBic.

The antenna's quadrifilar architecture provides a number of benefits, including complete overhead radiation pattern cover over the antenna, eliminating the keyhole null that is present with many Omni-directional antennas. The circularly polarized design is ideal for communication with overhead aircraft, UAVs, or for C-UAS product solutions.

An integrated bandpass filter helps to eliminate interference from other co-located radios operating outside of the antenna's operational frequency band, providing increased performance for attached radio systems.

Note: This antenna is for receive-only applications and includes an integrated RF limiter. The limiter has a maximum input power of 1.5W, and it compresses input signals between +5 dBm and +30 dBm down to 0 dBm.

Features: 
  • Quadrifilar antenna design
  • 1.05 - 1.35 GHz
  • 3.1 dBic Omni radiation pattern
  • Right-hand circular polarization
  • 1.5W power handling (receive applications only)
  • Integrated bandpass filter
  • Rugged G10 fiberglass radome
  • Spring base for RF connector strain relief
  • Type-N(m) RF connector

Applications:

  • Tactical radio systems
  • Air-to-ground communication systems
  • Ground Control Stations
  • Counter-UAS (C-UAS) / anti-drone systems
  • Mobile radio systems and vehicle applications
  • Fixed site infrastructure

Antenna Specifications

Parameter Value Units Tolerance
Antenna Pattern Omni Antenna
Frequency Band L
Impedance 50 Ohms
Minimum Frequency 1.05 / 1,050 GHz / MHz
Maximum Frequency 1.35 / 1,350 GHz / MHz
Frequency Bandwidth 0.3 / 300 GHz / MHz
Maximum VSWR 2:1 Ratio
Maximum Gain 3.80 dBic
Polarization RHCP
Maximum RF Input Power 1.5 Watts Antenna is for receive only applications
Horizontal (AZ) Beamwidth 360 Degrees
Vertical (EL) Beamwidth 114 - 161 Degrees
Ground Plane Required No
Color Black
Materials G10 Fiberglass
Spring or Gooseneck Spring
Spring Length 1.30 / 33.02 inches / mm
Maximum Wind Velocity 124 / 200 mph / kph
RF Connector Type Type-N(m)
Product Height 14.60 / 370.84 inches / mm ±0.13"
Product Diameter 2.00 / 50.80 inches / mm
Product Weight 1.1 / 0.5 lbs / kg

Filter Specifications

Parameter Value Units Tolerance
Filter Type Ceramic 3mm 4 Pole Bandpass Filter
Fo 1.2 / 1,200 GHz / MHz
Filter Impedance 50 Ohm
Filter Min Frequency 1.05 / 1,050 GHz / MHz
Filter Max Frequency 1.35 / 1,350 GHz / MHz
Insertion Loss 1.5 dB Across Passband
Rejection 1 -25 dBc @ 900 MHz
Rejection 2 -25 dBc @ 1600 MHz
Filter Power CW 10 Watts Average

Downloads

Data Sheet (PDF )