Omni Antenna, 4 Section Collinear, 2.2 - 2.5 GHz, 6 dBi, Flange Mount Base with Sealed Spring
Part #: 1087-079
$440.00
Qty | 1-9 | 10-24 | 25-99 | 100-249 |
---|---|---|---|---|
Price (each) | $440.00 | $400.00 | $361.00 | $317.00 |
Qty | 250-499 | 500-999 | 1000+ | |
---|---|---|---|---|
Price (each) | $277.00 | $256.00 | $240.00 |
Product Overview
Southwest Antennas Part # 1087-079 is a 4 section collinear omni antenna with a frequency range of 2.2 to 2.5 GHz and 6 dBi of peak gain. This antenna features an integrated 3.5" flange mount base with lock-wired screw connection to the Type-N(f) RF connector, and a weather resistant sealed spring that allows the antenna's radome to bend and flex with impact and return to its vertical operating position, helping to reduce risk of damage to the mated RF connector.
Features:
- Broad Band Coverage
- 4 Section Collinear Design
- 2.2 - 2.5 GHz
- 50W Power Handling
- 6 dBi Omni Radiation Pattern
- Rugged Construction Low Glare Black Radome
- End Cap Lettering “S”
- Weather Resistant Sealed Spring
- Flange Mount Base
- Type-N(f) RF Connector
Antenna Specifications
Parameter | Value | Units | Tolerance |
---|---|---|---|
Antenna Pattern | Omni Antenna | ||
Frequency Band | S | ||
Impedance | 50 | Ohms | |
Minimum Frequency | 2.2 / 2,200 | GHz / MHz | |
Maximum Frequency | 2.5 / 2,500 | GHz / MHz | |
Frequency Bandwidth | 0.3 / 300 | GHz / MHz | |
Maximum VSWR | 2:1 | Ratio | |
Maximum Gain | 6 | dBi | |
Polarization | Vertical | ||
Maximum RF Input Power | 50 | Watts | |
Horizontal (AZ) Beamwidth | 360 | Degrees | |
Vertical (EL) Beamwidth | 30 | Degrees | |
Ground Plane Required | No | ||
Antenna Labeling | End Cap Lettering "S" | ||
Radome Material | G10 Fiberglass | ||
Color | Black | ||
Spring or Gooseneck | Spring | ||
Spring Length | 0.75 / 19.05 | inches / mm | |
Spring Diameter | 0.75 / 19.05 | inches / mm | |
Spring Bend | ±45 | Degrees | Maximum (exceeding ±45 degrees may damage spring weather seal) |
Mount Style | Flange Mount | ||
Mounting Holes or Studs | 4x 0.250" Diameter Holes in Mount Plate | ||
Mount Diameter | 3.50 / 88.90 | inches / mm | |
Maximum Wind Velocity | 100 / 161 | mph / kph | |
RF Connector Type | Type-N(f) | ||
Product Height | 17.75 / 450.85 | inches / mm | ±0.13" |
Product Diameter | 0.81 / 20.62 | inches / mm | +0.02" / -.000" |
Product Weight | 7.4 / 208.7 | oz / grams |
Downloads
Recommended Accessories
No results found.