Part #: 1085-147
$439.00
Qty 1-9 10-24 25-99 100-249
Price (each) $439.00 $428.00 $417.00 $400.00
Qty 250-499 500-999 1000+  
Price (each) $384.00 $367.00 $351.00  

» Download Data Sheet (PDF )

Omni Antenna, 4 Section Collinear, 4.4 - 5.0 GHz, 6 dBi, Integrated RF Gooseneck, Internal Bandpass Filter
  • Elevation Pattern: Referenced to 6 dBi
  • Engineering Drawing: All dimensions are in inches
  • Images: Filter Response Plot|S21 & S11 / S12 & S22

Product Overview

Southwest Antennas Part # 1085-147 is a 4 section collinear dipole omni antenna with a frequency range of 4.4 - 5.0 GHz GHz and 6 dBi of peak gain. An integrated RF coaxial gooseneck with non-rotating RP-SMA(m) RF connector allows for flexibile antenna positioning.

This product features an integrated RF bandpass filter to help eliminate interference from other co-located radios operating outside of the antenna's 4.4 - 5.0 GHz operational frequency range, providing increased performance for attached radios.

Features: 
  • Broad Band Coverage
  • 4.4 - 5.0 GHz
  • 4 Section Collinear
  • 6 dBi Omni Radiation Pattern
  • 8W Power Handling
  • Rugged Construction
  • Low-Glare Black Radome
  • Integrated 3-Pole RF Bandpass Filter
  • RF Coaxial Gooseneck with Neoprene Heat Shrink Seal
  • Black Chrome Non-Rotating RP-SMA(m) RF Connector
  • End Cap Lettering “C.”

Antenna Specifications

Parameter Value Units Tolerance
Antenna Pattern Omni Antenna
Frequency Band C
Impedance 50 Ohms
Minimum Frequency 4.4 / 4,400 GHz / MHz
Maximum Frequency 5.0 / 5,000 GHz / MHz
Frequency Bandwidth 0.6 / 600 GHz / MHz
Maximum VSWR 2:1 Ratio
Maximum Gain 6 dBi
Polarization Vertical
Maximum RF Input Power 8 Watts
Horizontal (AZ) Beamwidth 360 Degrees
Vertical (EL) Beamwidth 30 Degrees
Spring or Gooseneck Gooseneck
Gooseneck Length 1.86 / 47.24 inches / mm +.000" / -.250"
Maximum Wind Velocity 62 / 100 mph / kph
RF Connector Type RP-SMA(m) Non-Rotating
RF Connector Features Black Chrome
Product Height 10.94 / 277.88 inches / mm ±.25"
Product Diameter 0.81 / 20.62 inches / mm +.020" / -.000"
Product Weight 3.3 / 93.9 oz / grams Estimated

Filter Specifications

Parameter Value Units Tolerance
Filter Type 3-Pole Bandpass Filter (ceramic)
Fo 4.7 / 4,700 GHz / MHz
Filter Frequency Band C Band
Filter Impedance 50 Ohm
Filter Min Frequency 4.4 / 4,400 GHz / MHz
Filter Max Frequency 5.0 / 5,000 GHz / MHz
Insertion Loss <0.5 dBa
Return Loss 16 dB over 100% of the passband
Rejection 1 -25 dBc Min @ 2510 MHz
Rejection 2 -20 dBc Min @ 6500 MHz
Filter Power CW 8 Watts
Filter Power Peak 10 Watts

Downloads

Data Sheet (PDF )