GPS Active L1 Antenna, +11 dB Active Gain, Integrated Sealed RF Coaxial Gooseneck Assembly, Type-N(m)
Qty | 1-9 | 10-24 | 25-99 | 100-249 |
---|---|---|---|---|
Price (each) | $225.00 | $220.00 | $215.00 | $209.00 |
Qty | 250-499 | 500-999 | 1000+ | |
---|---|---|---|---|
Price (each) | $205.00 | $200.00 | $195.00 |
Product Overview
The Southwest Antennas part # 1027-032 GPS Active L1 Antenna is a high-performance and ruggedized product designed to provide accurate timing and location services for GPS receivers, manpack radios, hand-held tactical radio systems, and other small form factor radio systems. This antenna features an integrated 3.42 inch RF coaxial gooseneck assembly that allows for flexible antenna positioning. The gooseneck is sealed with Polyolefin heat shrink providing a waterproof seal to 20 meters / 65.6 ft.
The GPS L1 Active Antenna features +11 dB of active low noise amplifier gain coupled with narrowband SAW filtering providing >40 dB out of band rejection from 35MHz above and below the L1 center frequency. The integrated high linearity LNA provides both a very low noise figure (<2.3 dB) and a high output IP3 (+15 dBm).
- GPS L1 frequency +/- 10.23 MHz bandwidth
- Out-of-band jamming immunity
- Superior out of band rejection
- Ultra low noise figure
- Ultra low power consumption
- Active LNA & Dual SAW filter circuitry
- Small form factor, light-weight
- Ruggedized design
- 50 V/m jamming resistant
- Burn-out protection, in-band jamming
- Ground plane independent
- Exceptional pattern bandwidth
- Sealed flexible gooseneck base, waterproof to 20 meters (65.6 ft.) when mated
- Type-N(m) RF connector
Applications
- Navigation systems
- Military and security
- Manpack radios
- Handheld radios
- Small form factor radios
- Low profile vehicle mounts
- Unattended/ Intelligent Munitions Systems
- Dismounted soldier-level communications
- Unmanned ground vehicles
- I.E.D. recognition & destruction jamming systems
- Asset tracking
- Precision timing
- LBS & M2M applications
- Oil & gas industries
- Law enforcement
- Mobile computing
- UAV Systems
Product Specifications
Parameter | Value | Units | Tolerance |
---|---|---|---|
Antenna Pattern | Hemispherical Antenna | ||
Frequency Band | GPS L1 | ||
Impedance | 50 | Ohms | |
Minimum Frequency | 1.565 / 1,565 | GHz / MHz | |
Maximum Frequency | 1.585 / 1,585 | GHz / MHz | |
Frequency Bandwidth | 0.02 / 20 | GHz / MHz | |
Maximum VSWR | 2.0:1 | ||
Maximum Gain | 1.50 | dBic | |
Axial Ratio | 1.0 | dB | Max @ zenith of 1575 MHz (2.6 dB max @ -3 dB beamwidth) |
Polarization | RHCP | ||
Horizontal (AZ) Beamwidth | 360 | Degrees | |
Vertical (EL) Beamwidth | 113 - 133 | Degrees | |
Ground Plane Required | No | ||
Radome Material | Ultem 1000 | ||
Color | Black | ||
Spring or Gooseneck | Gooseneck | ||
Gooseneck Length | 3.85 / 97.79 | inches / mm | ±0.09" |
Immersion | 20 | Meters | When fully mated |
RF Connector Type | Type-N(m) Non-Rotating | ||
IP Rating | IP67 | ||
Storage Temperature Range | -60 to +185 | °F | (-51.1 to +85 °C) |
Product Height | 6.11 / 155.19 | inches / mm | ±0.15" (Includes gooseneck) |
Product Diameter | 0.70 / 17.78 | inches / mm | ±0.15 |
Product Weight | 0.9 / 24.4 | oz / grams |
LNA Specifications
Parameter | Value | Units | Tolerance |
---|---|---|---|
LNA Gain | +11 | dB | |
LNA NF | 2.3 | dB | Typ., measured w/ PE85N1002 noise source |
Output P1dB | 7 | dBm | |
Output IP3 | 25 | dBm | |
LNA DC Voltage Range | 2.5 - 24 | VDC | |
LNA DC Current | 7 | mA | |
Filtering | >40 dB @ ±35 MHz of CF | ||
ESD Protection | Protection Diode |