GPS Active L1 Antenna, +11 dB Active Gain, SMA(m)
| Qty | 1-9 | 10-24 | 25-99 | 100-249 |
|---|---|---|---|---|
| Price (each) | $199.00 | $199.00 | $191.00 | $178.00 |
| Qty | 250-499 | 500-999 | 1000+ | |
|---|---|---|---|---|
| Price (each) | $175.00 | $162.00 | $143.00 |
Product Overview
Southwest Antennas part # 1027-021 is a small form factor GPS Active L1 antenna which can be deployed for accurate timing and location services for a wide variety of GPS receivers, manpack radios, hand-held tactical radio systems, and other small form factor radio systems.
The small size of this rugged, high-performance GPS design is also ideal for unmanned system, autonomous vehicles, and other automated or remote assets.
This GPS L1 Active antenna features 11 dB of active low noise amplifier gain coupled with narrowband SAW filtering providing >40 dB out of band rejection from 35 MHz above and below the L1 center frequency. The integrated high linearity LNA provides both a very low noise figure (<2.3 dB) and a high output IP3 (+15 dBm).
- GPS L1 frequency +/- 20 MHz bandwidth
- Out-of-band jamming immunity
- Superior out of band rejection
- Ultra low noise figure
- Ultra low power consumption
- Active LNA & Dual SAW filter circuitry
- Small form factor, light-weight
- Ruggedized design
- 50 V/m jamming resistant
- Burn-out protection, in-band jamming protection
- Ground plane independent
- Recessed non-rotating SMA(m) RF connector
- Exceptional pattern bandwidth
- Waterproof to 20 meters (65.6 ft.) when mated
Applications
- Navigation systems
- Military and security
- Manpack radios
- Handheld radios
- Small form factor radios
- Low profile vehicle mounts
- Unattended/ Intelligent Munitions Systems
- Dismounted soldier-level communications
- Unmanned ground vehicles
- I.E.D. recognition & destruction jamming systems
- Asset tracking
- Precision timing
- LBS & M2M applications
- Oil & gas industries
- Law enforcement
- Mobile computing
- UAV Systems
Product Specifications
| Parameter | Value | Units | Tolerance |
|---|---|---|---|
| Antenna Pattern | Hemispherical Antenna | ||
| Frequency Band | GPS L1 | ||
| Impedance | 50 | Ohms | |
| Minimum Frequency | 1.555 / 1,555 | GHz / MHz | |
| Maximum Frequency | 1.595 / 1,595 | GHz / MHz | |
| Frequency Bandwidth | 0.04 / 40 | GHz / MHz | |
| Maximum VSWR | 2.0:1 | ||
| Maximum Gain | 1.50 | dBic | |
| Axial Ratio | 1.3 | dB | max @ zenith (2 dB max @ -3dB beamwidth). Measured from cF |
| Polarization | RHCP | ||
| Horizontal (AZ) Beamwidth | 360 | Degrees | |
| Vertical (EL) Beamwidth | 114 - 124 | Degrees | |
| Ground Plane Required | No | ||
| Radome Material | Ultem 1000 | ||
| Color | Black | ||
| Immersion | 20 | Meters | When fully mated |
| RF Connector Type | Recessed SMA(m) Non-Rotating | ||
| IP Rating | IP67 | ||
| Storage Temperature Range | -60 to +185 | °F | (-51.1 to +85 °C) |
| Product Height | 1.78 / 45.21 | inches / mm | ±.02 |
| Product Diameter | 0.59 / 14.99 | inches / mm | ±.015 |
| Product Weight | 0.5 / 14.2 | oz / grams | |
LNA Specifications
| Parameter | Value | Units | Tolerance |
|---|---|---|---|
| LNA Gain | +11 | dB | |
| LNA NF | 2.3 | dB | Typical, measured with PEB5N1002 noise source |
| Output P1dB | 7 | dBm | |
| Output IP3 | 25 | dBm | |
| LNA DC Voltage Range | 2.5 - 24 | VDC | |
| LNA DC Current | 7 | mA | |
| Filtering | >50 dB @ ±35 MHz of CF | ||
| ESD Protection | Protection Diode | ||