Part #: 1027-002 -END OF LIFE - ORDER 1027-018

Call (858) 381-4197 to order

» Download Data Sheet (PDF )

  • Elevation Pattern: RHCP Gain referenced to +5 dBic
  • Saw Filter Rejection Plot
  • Engineering Drawing: All dimensions are in inches

Product Overview

END OF LIFE - NEW HIGHER PERFORMING VERSION IS PART # 1027-018

 

The Southwest Antennas part # 1027-002 GPS Active L1 Antenna is a high-performance and ruggedized product designed for GPS receivers, manpack, hand-held, and small form factor radio systems.

The GPS L1 Active Antenna features 11 dB of active low noise amplifier gain coupled with narrowband SAW filtering providing >30 dB out of band rejection from 38 MHz above and below the L1 center frequency and >50 dB out of band rejection from 50 MHz above and below the L1 center frequency. The integrated high linearity LNA provides both a very low noise figure (<1.5dB) and a high input IP3 (+4.9 dBm).

Features: 
  • GPS L1 frequency +/- 10.23 MHz bandwidth
  • Out-of-band jamming immunity
  • Superior out of band rejection
  • Ultra low noise figure
  • Ultra low power consumption
  • Active LNA & Dual SAW filter circuitry
  • Small form factor
  • Ultra light-weight design
  • Ruggedized design
  • 50 V/m jamming resistant
  • Burn-out protection, in band jamming
  • Ground plane independent
  • Recessed TNC male interface
  • Exceptional pattern bandwidth
  • Waterproof to 20 meters (65.6 ft.)

Applications

  • Navigation systems
  • Military and security
  • Manpack radios
  • Handheld radios
  • Small form factor radios
  • Low profile vehicle mounts
  • Unattended/ Intelligent Munitions Systems
  • Dismounted soldier-level communications
  • Unmanned ground vehicles
  • I.E.D. recognition & destruction jamming systems
  • Asset tracking
  • Precision timing
  • LBS & M2M applications
  • Oil & gas industries
  • Law enforcement
  • Mobile computing
  • UAV Systems

Product Specifications

Parameter Value Units Tolerance
Antenna Pattern Hemispherical Antenna
Frequency Band GPS L1
Impedance 50 Ohms
Minimum Frequency 1.565 / 1,565 GHz / MHz
Maximum Frequency 1.585 / 1,585 GHz / MHz
Frequency Bandwidth 0.02 / 20 GHz / MHz
Maximum VSWR 2.0:1
Maximum Gain 1.50 dBic ± 0.5dB
Axial Ratio 1.0 dB
Polarization RHCP
Horizontal (AZ) Beamwidth 140 Degrees
Vertical (EL) Beamwidth 140 Degrees
Radome Material Delrin 527 UV stable
Color Flat Black
RF Connector Type TNC(m) Non-Rotating
IP Rating IP67
Product Height 2.13 / 54.10 inches / mm ± .02
Product Diameter 0.70 / 17.78 inches / mm
Product Weight 1.1 / 31.2 oz / grams

LNA Specifications

Parameter Value Units Tolerance
LNA Gain +11 dB ± 1 dB
LNA NF <1.5 dB
LNA DC Voltage Range 2.0 - 3.6 VDC
LNA DC Current 8 mA
Input IP3 -2.0 dBm
Input P1dB 6.1 dBm
Filtering >50 dB @ ±50 MHz of CF
ESD Protection Protection Diode

Downloads

Data Sheet (PDF )