Band Pass Filter, 2.27 - 2.93 GHz, In-Line
Southwest Antennas Part # 1080-083 is a small, weatherproof bandpass filter designed to be installed in-line when additional RF filtering is required to improve system performance. This product is ideal for tactical radio systems, fixed site infrastructure, unmanned systems, or other communication networks that are operating in congested, high-interference RF environments. The ceramic bandpass filter is housed inside a rugged G10 fiberglass housing, with RF connectors on both ends of the product.
Part # 1080-083 features a band pass frequency range of 2.27 - 2.93 GHz and a very low <1.2 dBa insertion loss.
Southwest Antennas bandpass filters can be utilized to help eliminate interference by rejecting out-of-band noise from other co-located radios operating outside of the filter's 2.27 - 2.93 GHz operational bandpass range, providing increased performance for radio systems and attached antennas.
This filter is bi-directional and can be connected in either direction.
- Ceramic 3mm 3-Pole Bandpass Filter
- 2.27 - 2.93 GHz
- Tactical radio systems
- Vehicle mounted radios
- Federal government radio systems
- Fixed site communication infrastructure
- Unmanned aerial vehicles
- Unmanned ground vehicles
|Filter Type||3mm 3-Pole Bandpass Filter (ceramic)|
|Fo||2.282 / 2,282||GHz / MHz|
|Filter Frequency Band||S Band|
|Filter Min Frequency||2.27 / 2,270||GHz / MHz|
|Filter Max Frequency||2.93 / 2,930||GHz / MHz|
|Insertion Loss||<1.1||dBa||Maximum @ Center Frequency (Fo)|
|Return Loss||15||dB||Over 100% of the Passband|
|Rejection 1||-15||dBc||Min @ 2,120 MHz to 2,210 MHz|
|Filter Power CW||8||Watts|
|Filter Power Peak||10||Watts|
|Operating Temp||-40 to +85||C|
|Storage Temp||-55 to +125||C|
|Product Length||3.38 / 85.85||inches / mm||±.06"|
|Product Diameter||0.56 / 14.27||inches / mm||+.020" / -.000"|
|Product Weight||1.1 / 31.8||oz / grams|
|RF Connectors||RP-TNC(m) Rotating & RP-TNC(f) Non-Rotating|