Bandpass Filter, 4.40 - 5.00 GHz, In-Line
Qty | 1-9 | 10-24 | 25-99 | 100-249 |
---|---|---|---|---|
Price (each) | $274.00 | $263.00 | $252.00 | $241.00 |
Qty | 250-499 | 500-999 | 1000+ | |
---|---|---|---|---|
Price (each) | $230.00 | $219.00 | $208.00 |
Product Overview
Southwest Antennas Part # 1080-149 is a small, weatherproof bandpass filter designed to be installed in-line when additional RF filtering is required to improve system performance. This product is ideal for tactical radio systems, fixed site infrastructure, unmanned systems, or other communication networks that are operating in congested, high-interference RF environments. The ceramic bandpass filter is housed inside a rugged G10 fiberglass housing, with RF connectors on both ends of the product.
Part # 1080-149 features a band pass frequency range of 4.4 - 5.0 GHz and a very low <0.8 dBa insertion loss.
Southwest Antennas bandpass filters can be utilized to help eliminate interference by rejecting out-of-band noise from other co-located radios operating outside of the filter's 4.4 - 5.0 GHz operational bandpass range, providing increased performance for radio systems and attached antennas.
- Stand-alone filter module with RF connectors
- <0.8 dBa Insertion loss
- 10 dB return loss
- 10W peak power handling
- Small size and lightweight design
- Can be quickly added to existing systems to help improve performance
- 4.4 - 5.0 GHz operational frequency range:
- Ideal for DOD and federal law enforcement band applications
- European NATO band applications
- SMA(m) non-rotating and SMA(f) RF connectors
- The connector should be torqued to 3 - 5 in-lbs maximum
Applications:
- Tactical radio systems
- Vehicle mounted radios
- DOD / military radio systems
- Federal government radio systems
- Surveillance systems and border security applications
- Fixed site communication infrastructure
- Unmanned aerial vehicle command and control
- Unmanned ground vehicles
- NATO military radio systems
Filter Specifications
Parameter | Value | Units | Tolerance |
---|---|---|---|
Filter Type | 3mm 4-Pole Bandpass Filter (ceramic) | ||
Fo | 4.7 / 4,700 | GHz / MHz | |
Filter Frequency Band | C Band | ||
Filter Impedance | 50 | Ohms | |
Filter Min Frequency | 4.4 / 4,400 | GHz / MHz | |
Filter Max Frequency | 5.0 / 5,000 | GHz / MHz | |
Insertion Loss | 0.8 | dBa | Maximum @ 4,700 MHz |
Return Loss | 10 | dB | From 4,400 MHz to 5,000 MHz |
Rejection 1 | -25 | dBc | Min DC to 3,600 MHz |
Rejection 2 | -25 | dBc | Min 5,800 MHz to 9,400 MHz |
Filter Power CW | 8 | Watts | |
Filter Power Peak | 10 | Watts | |
Operating Temp | -40 to +85 | C | |
Product Length | 2.74 / 69.60 | inches / mm | ±.06" (including RF connector length) |
Product Diameter | 0.56 / 14.27 | inches / mm | |
Product Weight | 0.8 / 23.1 | oz / grams | |
RF Connectors | SMA(m) Non-Rotating to SMA(f) Non-Rotating |