Single Element Panel Antenna, 1.7 - 2.5 GHz, 9 dBi, Internal 10kOhm Resistor

Part #: 1004-032
$379.00
Qty 1-9 10-24 25-99 100-249
Price (each) $379.00 $379.00 $341.00 $304.00
Qty 250-499 500-999 1000+  
Price (each) $272.00 $240.00 $219.00  

» Download Data Sheet (PDF )

Single Element Panel Antenna, 1.7 - 2.5 GHz, 9 dBi, Internal 10kOhm Resistor
  • Elevation Pattern: Referenced to + 10dBi
  • Azimuth Pattern: Referenced to + 10dBi
  • Engineering Drawing: All dimensions are in inches

Product Overview

Southwest Antennas Part # 1004-032 is a directional panel antenna with an operational frequency range of 1.7 - 2.5 GHz, and a peak gain of 9 dBi. The antenna features a black kydex radome and is suitable for use in indoor or outdoor environments.

Note: This product includes a resistor providing the antenna with 10kOhm DC impedance and a maximum DC power of 0.25W

Features: 
  • Broad Band Coverage
  • 1.7 - 2.5 GHz
  • 9 dBi
  • Internal 10kOhm Resistor
  • Black Kydex Radome
  • Black Anodized Ground Plane
  • SMA(f) RF Connector
  • Designed for L&S Band communication in the following markets:
    • Law Enforcement
    • Surveillance
    • UAV & UGV Ground Stations

Antenna Specifications

Parameter Value Units Tolerance
Antenna Pattern Directional Antenna
Frequency Band L & S
Impedance 50 Ohms
Minimum Frequency 1.7 / 1,700 GHz / MHz
Maximum Frequency 2.5 / 2,500 GHz / MHz
Frequency Bandwidth 0.8 / 800 GHz / MHz
Maximum VSWR 2.0:1
Maximum Gain 9 dBi
Polarization Vertical
Maximum RF Input Power 100 Watts
Horizontal (AZ) Beamwidth 55 Degrees
Vertical (EL) Beamwidth 65 Degrees
Ground Plane Required No
Radome Material Kydex
Color Black
Maximum Wind Velocity 62 / 100 mph / kph
RF Connector Type SMA(f)
Product Length 6.19 / 157.23 inches / mm ±.13"
Product Width 4.19 / 106.43 inches / mm ±.13"
Product Height 1.25 / 31.75 inches / mm ±.13"
Product Weight 5.0 / 141.7 oz / grams

Downloads

Data Sheet (PDF )