Part #: 1080-115
$249.00
Qty 1-9 10-24 25-99 100-249
Price (each) $249.00 $239.00 $229.00 $219.00
Qty 250-499 500-999 1000+  
Price (each) $209.00 $199.00 $189.00  

» Download Data Sheet (PDF )

Bandpass Filter, 1.78 - 1.85 GHz, In-Line
  • Engineering Drawing: All dimensions are in inches
  • Filter Response Plot

Product Overview

Southwest Antennas Part # 1080-115 is a small, weatherproof bandpass filter designed to be installed in-line when additional RF filtering is required to improve system performance. This product is ideal for tactical radio systems, fixed site infrastructure, unmanned systems, or other communication networks that are operating in congested, high-interference RF environments. The ceramic bandpass filter is housed inside a rugged G10 fiberglass housing, with RF connectors on both ends of the product.

Part # 1080-115 features a band pass frequency range of 1.78 - 1.85 GHz and a very low <1.1 dBa insertion loss.

Southwest Antennas bandpass filters can be utilized to help eliminate interference by rejecting out-of-band noise from other co-located radios operating outside of the filter's 1.78 - 1.85 GHz operational bandpass range, providing increased performance for radio systems and attached antennas.

Features: 
  • Stand-alone filter module with RF connectors
  • <1.1 dBa Insertion loss
  • 15 dB return loss
  • 10W peak power handling
  • Small size and lightweight design
  • Can be quickly added to existing systems to help improve performance
  • 1.78 - 1.85 GHz operational frequency range
    • Ideal for federal and military use in the licensed 1,780 - 1,850 MHz band
  • RP-SMA(m) non-rotating and RP-SMA(f) RF connectors

Applications:

  • Tactical radio systems
  • Vehicle mounted radios
  • Federal government radio systems
  • Military tactical radio relay
  • Law enforcement video surveillance and border security applications
  • Fixed site / point-to-point communication infrastructure
  • Unmanned aerial vehicles
  • Unmanned ground vehicles

Filter Specifications

Parameter Value Units Tolerance
Filter Type 3mm 3-Pole Bandpass Filter (ceramic)
Filter Frequency Band L Band
Filter Impedance 50 Ohms
Filter Min Frequency 1.78 / 1,780 GHz / MHz
Filter Max Frequency 1.85 / 1,850 GHz / MHz
Insertion Loss <1.1 dBa
Return Loss 15 dB Over 100% of BW
Rejection 1 -50 dBc DC to 780 MHz
Rejection 2 -30 dBc Min @ 1,480 MHz
Rejection 3 -10 dBc Min @ 1,680 MHz
Rejection 4 -10 dBc Min @ 1,950 MHz
Rejection 5 -25 dBc Min @ 2,150 MHz
Rejection 6 -35 dBc Min @ 2,350 MHz
Filter Power CW 8 Watts
Filter Power Peak 10 Watts
Operating Temp -40 to +85 C
Product Length 2.740 / 69.596 inches / mm ±.06" (including RF connector length)
Product Diameter 0.562 / 14.275 inches / mm
Product Weight 0.82 / 23.13 oz / grams
RF Connectors RP-SMA(m) Non-Rotating to RP-SMA(f)

Downloads

Data Sheet (PDF )