3/4 Inch Thru-Hole Permanent Vehicle Antenna Mounting Kit, DC - 8 GHz, RP-TNC(f) RF Connector to Pigtail Cable with Type-N(m) Connector
| Qty | 1-9 | 10-24 | 25-99 | 100-249 |
|---|---|---|---|---|
| Price (each) | $243.00 | $238.00 | $235.00 | $231.00 |
| Qty | 250-499 | 500-999 | 1000+ | |
|---|---|---|---|---|
| Price (each) | $177.00 | $155.00 | $147.00 |
Product Overview
Southwest Antennas Part # 1072-004-1 is a thru-hole permanent vehicle antenna mounting kit for ground vehicles or equipment enclosures. Like popular NMO style vehicle antenna mounts, this kit allows for any Omni-directional antenna with RP-TNC(m) RF connector to be deployed for mobile applications.
This kit allows for professional-quality antenna mounts to easily be added to almost any vehicle for operators of tactical radio systems, MIMO / MANET mesh radios, and similar radios or transceivers.
The kit comes with 17 feet of integrated LMR-195 low loss RF cable with pigtail lead which is suitable for crimping to any compatible RF connector. This product ships with bare pigtail lead to aid in installation through small holes, under liners and behind vehicle trim and to allow for easy trimming of any excess cable length once the installation is complete.
Note: This product can be used as a drop-in replacement for existing NMO antenna mounts sized for 3/4 inch thru-hole installation. For installation into a vehicle without any existing antenna mount, an appropriate location on the vehicle will need to be determined, and a 3/4-inch hole drilled through the vehicle's roof with appropriate tools.
- 3/4 inch thru-hole permanent vehicle antenna mounting kit
- DC to 8.0 GHz frequency coverage
- RP-TNC(f) Right Angle RF connector on mount
- For use with any Omni-directional antenna with RP-TNC(m) RF connector
- Integrated 17-foot LMR-195 cable with pigtail lead
- Lead can be crimped to the Type-N (m) connector supplied or any compatible RF connector of the user's choice for radio compatibility
- Matte black finish
- IP-67 rated when properly installed with O-ring and silicone sealant
Antenna Mount Kits
| Parameter | Value | Units | Tolerance |
|---|---|---|---|
| Impedance | 50 | Ohms | |
| Minimum Frequency | 0.0 / 0 | GHz / MHz | |
| Maximum Frequency | 8.0 / 8,000 | GHz / MHz | |
| Maximum VSWR | 1.5:1 | Ratio | |
| Insertion Loss | Varies by frequency and installed cable length, see chart for details | ||
| Maximum RF Input Power | Varies by frequency and installed cable length, see chart for details | ||
| IP Rating | IP67 when properly installed with O-ring and silicone sealant per instructions | ||
| Operating Temperature Range | -40 to +85 | C | |
| Storage Temperature Range | -40 to +85 | C | |
| Mount RF Cable Type | LMR-195 | ||
| Mount RF Cable Length | 17.00 / 5.18 | ft / m | Pigtail lead at end of cable for crimping to RF connector Type-N(m) |
| Mount Antenna RF Connector | Right Angle RP-TNC(f) | ||
| Mount Cable RF Connector | Pigtail lead for crimping to RF connector after installation | ||
| Mount Color | Black | ||
| Product Height | 1.20 / 30.48 | inches / mm | |
| Product Diameter | 1.50 / 38.10 | inches / mm | Widest OD Measured at Lock Nut |
| Product Weight | 8.3 / 235.6 | oz / grams | |